RELAY CÔNG NGHIỆP

RELAY TRUNG GIAN CARLO GAVAZZI

RELAY TRUNG GIAN CARLO GAVAZZI

RELAYS TÉP MỎNG 6MM - DC24V

Slim size (width 5mm) • High breakdown voltage 4kV (between coil and contacts) • Surge voltage up to 6kV (between coil and contacts) • Conforms to VDE 0700, 0631 reinforced insulation • High sensitivity: Approx. 170mW • RoHS compliant • Dimensions: 28.0 x 5.0 x 15.0mm • Changeover contact (SPDT) or Normally Open (SPST) contact configuration option

Slim Relays and Socket RPYS - ZPYS

RPYS is an electromechanical relay that can switch resistive loads up to 10 A (for 1 changeover contact version) and 5 A (for the 2 changeover contact version). RPYS comes in three models: • Basic version: No LEDs and no test button • LED • LED and test button version ZPYS is the corresponding socket for RPYS relays. It is available in both screw and spring (push-in) terminals. Additional accessories such as ID tag, plastic clamp, protection diode and bus jumper are also available

RELAY 8 CHÂN DẸP - RMIA210

- Điện áp: 12 to 230 VAC 12 to 110 VDC - Tiếp điểm: 2NO-2NC 10A

RELAY 14 CHÂN DẸP -RMIA45

12 to 230 VAC 12 to 110 VDC - Tiếp điểm: 4NO-4NC 5A

RELAY 8 CHÂN DẸP LỚN - RPYA002

RELAY 14 CHÂN DẸP LỚN-RPYA004

RPYA004 • High switching power • Wide range of applications • 10A switching capacity • 4 pole configuration • Flanged pins 5mm (0.20”) • DC coils from 6 to 220V • AC coils from 6 to 380V • Compliant with CE low voltage directive • TÜV, UL, CSA approved

RELAY 8 CHÂN TRÒN - RCP8002

- Điện áp: 12 to 230 VAC 12 to 110 VDC - Tiếp điểm: 2NO-2NC 10A

RELAY 11 CHÂN TRÒN -RCP11003

- Điện áp: 12 to 230 VAC 12 to 110 VDC - Tiếp điểm: 3NO-3NC 10A

POWER RELAYS

•Compressor control relay • Switching capacity 30A •DC coils 6 to 48VDC • AC coils 24 to 277VAC • 2 normally open contacts, 2 change over contacts •Reinforced insulation 4kV / 8mm (0.31”) •Meets class F construction • PCB or Fast-on terminal •General purpose, power loads • Standard as sealed •CE, UL approved 2. • Power relay • Switching capacity 30A • DC coils 6 to 110VDC • AC coils 12 to 240VAC • 1 or 2 normally open contact • Reinforced insulation 4kV / 8 mm (0.31”) • Heavy load up to 8310VA • Motor load up to 3HP @ 240VAC • PCB or Fast-on terminal • General purpose, industrial power application • CE, TÜV, UL approved